North Highlands, CA 6215 Watt Ave #115, North Highlands, CA 95660

Subpanel Installation North Highlands CA

Our subpanel installation North Highlands CA service gives garages, workshops, ADUs and additions their own breaker space. We check your main panel first, run the feeder, file the county permit and label every circuit. Call (279) 284-1643 for a price range.

6215 Watt Ave #115, North Highlands, CA 95660 who does the work
A new garage subpanel in a North Highlands home

Main Panel Full and No Power in the Garage?

Plenty of homes here reach the same point. The main panel has no open slots, and every new project means another extension cord. Common signs include:

  • A table saw or compressor tripping the garage circuit
  • Cords running from the house to a backyard shop
  • A plan for an ADU, but no idea where its power will come from
  • A hot tub or RV pad with no circuit to feed it

A subpanel solves this by adding a second set of breakers close to where you need power.

Extension cords are not a long term fix. They overheat under heavy tools, create trip hazards and often break code rules for permanent use. A subpanel gives you real outlets and circuits where you work.

Subpanels are also a smart move before adding an EV charger in a detached garage.

Projects That Need Their Own Subpanel

Every project draws a different load. Here is what we often install for each.

ProjectTypical Subpanel Size
Attached garage60 amps
Detached garage or workshop60 to 100 amps
ADU or guest house100 amps
Room addition60 amps
Hot tub or spaOften a dedicated spa panel
RV outlet or EV charger50 to 60 amps

A 100 amp subpanel installation suits most ADUs and larger shops, while smaller garages do well with 60 amps.

If you are not sure what size you need, list what you plan to run. We turn that list into a size that fits today with some room to grow.

Load Check First to Make Sure Your Main Panel Can Feed It

A subpanel draws its power from your main panel, so the main has to have room. Before we quote, we run a load calculation that adds up your AC, appliances and planned loads.

If the numbers work, we install the subpanel as planned. If your main is already near its limit, we quote a 200 amp upgrade alongside it, so the new subpanel does not overload the system. Either way, you see both numbers before deciding.

Detached Garage and Shop Subpanels With Trenching Included

Detached buildings take more work than an attached garage, and our price includes all of it:

  • Trench and conduit: We dig the trench, lay conduit at the depth code requires and backfill when done.
  • Correct feeder size: Wire is sized for the distance and the load, so tools start strong at the far end.
  • Ground rod: Separate buildings get their own grounding electrode, as the California Electrical Code calls for.
  • Clean finish: Labels inside the panel and a tidy yard when we leave.

A detached garage subpanel Rio Linda owners order on bigger lots, or a shop panel out toward Elverta, gets the same written price before any digging begins.

Before digging, we call for utility markings so the trench avoids gas, water and sewer lines.

ADU Subpanels Permitted and Inspected for You

Building an ADU means coordinating trades, and power is often the last piece. Our ADU subpanel installation Sacramento County work includes:

  1. Planning feeder size and location with your builder
  2. Filing the subpanel permit Sacramento County requires
  3. Talking with SMUD (Sacramento Municipal Utility District) if a separate meter makes more sense
  4. Booking the inspection and meeting the inspector

This is where our permit first habit pays off for ADU owners, since permitted work keeps rental income and resale on solid footing.

ADUs used as rentals often benefit from separate metering, so tenants pay their own SMUD bill. We explain the options and costs so you can decide early in the build.

Garage and ADU Subpanels From Recent Projects

Recent jobs include a garage subpanel North Highlands owners in Haggin Park added for a woodshop, a workshop subpanel install 95660 job behind a ranch home and an ADU feed in an Oakdale backyard.

Subpanels, Feeder Wire and Breakers We Use

We install main lug subpanels from established brands, with 60 and 100 amp feeder breakers matched to your project. Feeder wire runs in conduit, and every new circuit gets its own labeled breaker. AFCI and GFCI breakers go in wherever code calls for them.

We size every subpanel with a little room to grow. If you plan to add a mini split, EV charger or more tools later, open slots now save a second project down the road.

Subpanel Pricing by Project Type

Your subpanel cost North Highlands depends on distance from the main panel, trench length and the size you need.

Project TypeWhat Drives the Price
Attached garageShort feeder run, simplest install
Detached garage or shopTrench length, conduit and ground rod
ADULarger feeder, permit and possible meter work
Main panel also fullSubpanel plus 200 amp upgrade

Our subpanel installation price comes in writing after a quick look at the route, so there are no surprises when the trench is open.

Plan Power for Your Shop or ADU

Tell us what you are building and where. We will map out the feeder route and give you a price range on the first call.

Subpanel FAQs for Garages, Shops and ADUs in North Highlands

Questions owners ask before they add a subpanel to my house projects.

Areas We Serve

Get a Subpanel Quote in North Highlands

Looking for a subpanel electrician near me or wondering who installs subpanels near me? Call (279) 284-1643 and describe your project for a price range.

Call Now Free Quote